Disposable handcuffing ESP system – more detailed information >
HT-01-Y / HT-01-B Textile disposable handcuffs
HT-01-T Training version of textile disposable handcuffs
Handcuffs use new locking system, which prevents release from handcuffs even to physically very strong persons. Minimal tearing strength of handcuffs is 140 kg (verified by certified tests). Main advantages consist in low weight and easy storage. This product was already patented in the USA. These handcuffs are broadly used by Police of Czech Republic and Slovak Republic. Bright yellow fabric ribbon (HT-01-Y) enables easy identification of handcuffed person. Handcuffs can be made also in black colour (HT-01-B). They are supplied in a set of 5 pieces.
HT-01-T: We offer together with disposable handcuffs HT-01-Y or HT-01-B also their training version HT-01-T in red colour, which makes it possible to train handcuffing techniques without necessity of destroying real disposable handcuffs. These handcuffs are equipped instead of fixation locks with silicon friction rollers, which enable smooth and easy fixation of handcuffs. They, however, exert slight resistance when the handcuffed person tries to release himself or herself from the handcuffs. They thus imitate behaviour of real handcuffs, but can be easily and safely taken off.
HK-01 | Cutter for cutting disposable handcuffs
HK-02 | Multi-purpose knife
Ergonomic shape with an aperture for safe holding and with an eye for hanging on an outfit or a key-ring. Cutter edge is embedded in order to prevent any injury at manipulation. Plastic lead-in part of the cutter is of special shape enabling its easy sliding under the handcuffs.
We offer also model of multi-purpose knife HK-02, which can be used not only for removal of disposable handcuffs. Thanks to the special shape of the blade it is possible to use this knife also for rapid cutting of car safety belts, either in a car accident or at police crackdown on dangerous person sitting in the vehicle. Multi-purpose knife HK-02 can be used for easy and safe removal of clothes during the emergency first aid.
HTH-03 or HTH-13 or HTH-23 Swivelling plastic holder for 3 pieces of disposable textile handcuffs HT-01
HTH-63 Plastic holder with metallic clip for 3 pieces of disposable textile handcuffs HT-01
Plastic container holder is designated for comfortable daylong carrying of larger number of disposable textile handcuffs of the type HT-01. They are inserted into the holder after turning the top cover. Instructions for putting the handcuffs into the holder (“loading”) are given on the lid of casing. After opening of the side flexible flap the handcuffs can be quickly and easily taken out by pulling the projecting of textile ribbon. The holder can be after its emptying easily filled with other handcuffs and be thus ready for another action. The holder is made from highly resistant polyamide and it is manufactured in variants for 3 pieces of handcuffs.
instructions for putting the handcuffs into the holder
HTH-03: This model of holder uses special patented fastening clamp (EP 1604587. US Pat.: 7.380.692, RU Pat.: 2352233), which ensures its fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
HTH-13: This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. It enables the same manner of rotation as previous type HTH-03. However, the distance between the belt and holder is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system.
HTH-23: This type of holder uses the “paddle” type fixture from the renowned company Fobus, which enables a comfortable carrying of holder for disposable textile handcuffs. The paddle has been designed for carrying on ordinary clothes and it tightly fits the user’s body. Its special bent shape holds firmly the holder for disposable textile handcuffs not only during carrying, but also when it is necessary to draw it quickly. This holder, as one of few paddle type holders on the market, enables also a smooth rotation of the carried holder for disposable textile handcuffs in respect to the belt in full circle of 360°, with 16 locking positions.
HTH-63: This model of holder is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E. system. Metallic clip can be adjusted by swivelling for carrying on the right or left side.
HTH-06 or HTH-16 Swivelling plastic holder for 6 pieces of disposable textile handcuffs HT-01
HTH-66 Plastic holder with metallic clip for 6 pieces of disposable textile handcuffs HT-01
Plastic container holder is designated for comfortable daylong carrying of larger number of disposable textile handcuffs of the type HT-01. They are inserted into the holder after turning the top cover. Instructions for putting the handcuffs into the holder (“loading”) are given on the lid of casing. After opening of the side flexible flap the handcuffs can be quickly and easily taken out by pulling the projecting of textile ribbon. The holder can be after its emptying easily filled with other handcuffs and be thus ready for another action. The holder is made from highly resistant polyamide and it is manufactured in variants for 6 pieces of handcuffs.
instructions for putting the handcuffs into the holder
HTH-06: This model of holder uses special patented fastening clamp (EP 1604587. US Pat.: 7.380.692, RU Pat.: 2352233), which ensures its fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
HTH-16: This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. It enables the same manner of rotation as previous type HTH-06. However, the distance between the belt and holder is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system.
HTH-66: This model of holder is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E. system. Metallic clip can be adjusted by swivelling for carrying on the right or left side.
HTH-09 or HTH-19 Swivelling plastic holder for 9 pieces of disposable textile handcuffs HT-01
HTH-69 Plastic holder with metallic clip for 9 pieces of disposable textile handcuffs HT-01
Plastic container holder is designated for comfortable daylong carrying of larger number of disposable textile handcuffs of the type HT-01. They are inserted into the holder after turning the top cover. Instructions for putting the handcuffs into the holder (“loading”) are given on the lid of casing. After opening of the side flexible flap the handcuffs can be quickly and easily taken out by pulling the projecting of textile ribbon. The holder can be after its emptying easily filled with other handcuffs and be thus ready for another action. The holder is made from highly resistant polyamide and it is manufactured in variants for 9 (for anti-riot units) pieces of handcuffs.
instructions for putting the handcuffs into the holder
HTH-09: This model of holder uses special patented fastening clamp (EP 1604587. US Pat.: 7.380.692, RU Pat.: 2352233), which ensures its fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
HTH-19: This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. It enables the same manner of rotation as previous type HTH-09. However, the distance between the belt and holder is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system.
HTH-69: This model of holder is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E. system. Metallic clip can be adjusted by swivelling for carrying on the right or left side.
HMH-01 Nylon holder for handcuffs
The holder is designated for majority of the types of used metallic handcuffs. It is made of highly resistant and light, specially formed nylon. On the back side it is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E. system. Moreover inside the holder is a very useful pocket for spare key, thanks to which the key is always readily available.
